In the transferred equipment and process, eLux fluid assembly equipment does not require precise alignment control, so the equipment construction cost is relatively low (a fully automated 12' The equipment is about US$100,000. Assembling a 12-inch Micro LED panel, whether it is 518,400 Micro LEDs (42 PPI) or 8,294,400 Micro LEDs (168 PPI), the assembly process takes only 15 minutes.
The fluid assembly technology will improve the utilization of Micro LED epitaxial wafers. Quick assembly and low-cost machines make eLux fluid assembly technology an impressive cost advantage. eLux 12' Color display 'High-efficiency and low-cost fluid assembly technology' is the key to the commercial street lamp manufacturers mass production of Micro LED displays. The fluid assembly of eLux is definitely a key process for the commercial mass production of Micro LED in the future.J Lee responded by showing off a 12-inch full-color Micro LED display.J Lee, eLux has broken through the threshold of the previous monochrome display technology, which can realize RGB full-color display, and is matched with its own unique fluid assembly solution to greatly reduce manufacturing costs. In addition, with the characteristics of fluid assembly, it is only necessary to make a special design on the Micro LED chip, and the chip can be accurately aligned. Micro LED in liquid. J.
If it is to create a large-scale Micro LED indoor display with a longer viewing distance, the wavelength uniformity requirement for Micro LED epitaxial wafers can even be relaxed to 10 nm, and the utilization rate of LED epitaxial wafers can also be greatly improved. Location, the transfer process will use more Micro LED than the number of pixels, and the excess Micro LED and fluid can be recycled repeatedly after assembly. It is different from the Pick; Place method for Micro LED epitaxial wafers. Li Zongzhan) and chief technology officer Paul Schuele are both from Sharp Laboratories of America. The transfer method of eLux uses liquid as a carrier to transport the Micro LED chips to each pixel on the TFT backplane.
Therefore, eLux's transfer solution will make the cost of Micro LED display more competitive. A total of 2.com. In this interview, J. Fluid assembly improves the uniformity of the Micro LED display (Text: Roger/Max/Simon) If you need to reprint, you need E-Mail authorization from this website. eLux CEO Jong-Jan Lee (Dr. After Hon Hai took over Sharp in 2016, eLux was established in the United States and committed to building Micro LED technology.